Search results for " ash"
showing 10 items of 131 documents
Novel biomass fly ash-based geopolymeric mortars using lime slaker grits as aggregate for applications in construction: Influence of granulometry and…
2019
Abstract This work discusses the influence of the aggregate granulometry and the binder/aggregate ratio on the engineering properties of novel green geopolymeric mortars. Two wastes generated by a Portuguese Kraft pulp industry are employed to manufacture the material: lime slaker grits (used as aggregate) and biomass fly ash (to partially replace the metakaolin − 70 wt% substitution). The novel geopolymeric mortars could find innovative applications as sustainable construction materials. The studied mix design foresees the use of several grits granulometric ranges and ratios binder/aggregate to discuss workability, water sorptivity, and mechanical performance of the novel mortars. To date,…
Agroecology and Strategies for Climate Change
2012
; Sustainable agriculture is a rapidly growing field aiming at producing food and energy in a sustainable way for humans and their children. Sustainable agriculture is a discipline that addresses current issues such as climate change, increasing food and fuel prices, poor-nation starvation, rich-nation obesity, water pollution, soil erosion, fertility loss, pest control, and biodiversity depletion.Novel, environmentally-friendly solutions are proposed based on integrated knowledge from sciences as diverse as agronomy, soil science, molecular biology, chemistry, toxicology, ecology, economy, and social sciences. Indeed, sustainable agriculture decipher mechanisms of processes that occur fro…
Unexplored alternative use of calcareous sludge from the paper-pulp industry in green geopolymer construction materials
2020
Abstract Calcareous sludge is an alkaline waste produced by the paper pulp industry that is commonly disposed of in land-fill. However, recent studies and the European regulations discourage such practice. This work investigates an alternative and innovative way to recycle and reuse this waste, as filler, in the production of green geopolymeric mortars intended for applications in construction. This is the first time that this calcareous sludge is used to produce novel waste-based materials, in both construction and geopolymer technology. The novel alkali-activated mortar also uses biomass fly ash – another slightly investigated waste stream – to substitute the metakaolin (70 wt% substituti…
Hydromechanical behaviour of a volcanic ash
2013
This paper presents experimental analysis and numerical modelling aimed at improved understanding and prediction of the hydromechanical behaviour of volcanic ash at various states of saturation. Results from a comprehensive experimental programme are presented in order to characterise the response of the material in terms of matric suction and confining stress changes. The evolution of the yield stress at different suction levels has been quantified. The volumetric response with suction variations allowed the analysis of the collapse-upon-wetting behaviour. Water retention and permeability are also addressed. Tests results are used to calibrate a constitutive model based on the effective s…
Particle size based recovery of phosphorus from combined peat and wood fly ash for forest fertilization
2016
Abstract Correlations between the concentrations of P, K, and As with particle size in fly ash from power plants were examined with a viewpoint to obtain fractions suitable for forest fertilization. Fly ash samples from several CHP plants were fractionated by using four sieves and the five fractions were analyzed by ICP-OES; it was found that both P and K are concentrated in smallest size (
Overview of the Spirit Mars Exploration Rover Mission to Gusev Crater: Landing site to Backstay Rock in the Columbia Hills
2006
Spirit landed on the floor of Gusev Crater and conducted initial operations on soil covered, rock-strewn cratered plains underlain by olivine-bearing basalts. Plains surface rocks are covered by wind-blown dust and show evidence for surface enrichment of soluble species as vein and void-filling materials and coatings. The surface enrichment is the result of a minor amount of transport and deposition by aqueous processes. Layered granular deposits were discovered in the Columbia Hills, with outcrops that tend to dip conformably with the topography. The granular rocks are interpreted to be volcanic ash and/or impact ejecta deposits that have been modified by aqueous fluids during and/or after…
Colloidal stability of nanoparticles derived from simulated cloud-processed mineral dusts
2013
AbstractLaboratory simulation of cloud processing of three model dust types with distinct Fe-content (Moroccan dust, Libyan dust and Etna ash) and reference goethite and ferrihydrite were conducted in order to gain a better understanding of natural nanomaterial inputs and their environmental fate and bioavailability. The resulting nanoparticles (NPs) were characterised for Fe dissolution kinetics, aggregation/size distribution, micromorphology and colloidal stability of particle suspensions using a multi-method approach. We demonstrated that the: (i) acid-leachable Fe concentration was highest in volcanic ash (1mMg−1 dust) and was followed by Libyan and Moroccan dust with an order of magnit…
Selective recovery of phosphorus as AlPO4 from silicon-free CFB-derived fly ash leachate
2018
The prospect of phosphorus (P) recovery from siliceous fly ash was investigated. The phosphorus content in the pristine fly ash was 1.21%. Obtaining pure phosphorus products from fly ash is very challenging because of high concentration of other elements, silicon (Si) at 17.3% being the major contaminant. The fly ash was fractionated with sieve size of 125 μm to concentrate the phosphorus in the small-size fraction, which also facilitated the removal of 78% of silica (Si) in the solid phase. The fractionated fly ash was treated with 8 M HCl in order to remove 98% of Si by aging (5 h) of leachate until precipitation of Si-gel, and a phosphorus-rich solution is obtained. Iron (Fe) is also con…
Innovative Recycling of Lime Slaker Grits from Paper-Pulp Industry Reused as Aggregate in Ambient Cured Biomass Fly Ash-Based Geopolymers for Sustain…
2019
Lime slaker grits and biomass fly ash are solid wastes produced by the Kraft paper-pulp industry that are commonly disposed of in landfill. However, recent studies and European regulations discourage such disposal practices. This work investigates an alternative and innovative way to recycle and reuse these wastes in the production of green geopolymeric mortars intended for application in the construction industry. Here, biomass fly ash was used as the main source of alumino-silicate in the binder precursor (70 wt.% substitution to metakaolin), and grits (ranging from 1&ndash
Use of Wood Ash in the Forest and its Effect on the Concentration of Essential and Heavy Metallic Elements in Soil and Blueberries <i>(Vacciniu…
2020
The aim of this research is to evaluate the influence of wood ash as an additive fertilizer to forest soil and growing blueberries (Vaccinium myrtillus L.) in terms of metallic element content. To evaluate the effect of wood ash on the forest ecosystem, was selected two forest areas which was fertilized with a certain amount of wood ash (bottom ash and fly ash). The selected forest areas were divided into two types of sampling plots (fertilized with ash and control). Obtained results showed that in the bottom ash dispersion area the concentration of Ca, K, Ni, Cu is almost twice higher in the fertilized plots than control plots. In the blueberries, metallic element content is similar and do…